Posts
The NEC NEAX 2400 PBX system is designed to be part of both simple and complex phone system configurations. The PBX system is designed with four internal data or I/O card expansion slots for use in expanding its system capabilities. Data or I/O cards give the NEC PBX system the ability to handle more phones in the system, and phone extensions per phone. Once a data card is installed into the NEC PBX, it is automatically available for use by the system.
Instructions
1) Unscrew the six screws on the back panel of the NEC PBX to remove the panel. Once the screws are removed, lift the back panel upwards and off.
2) Insert the data card into one of the four empty data card slots on the center left-side of the PBX's main board, aligning the metal contacts on the data card with the metal contacts in the card slot. Push the card in gently until it snaps into place.
3) Replace the back panel onto the unit, sliding it downward into place. Then, replace and tighten the back panel screws
Polycom SoundPoint IP 331 - VoIP phone - SIP - 2 lines
Grandstream GXV-3000 - IP video phone - SIP, SIP v2 - 3 lines
Aastra 6757i CT RP - Wireless VoIP phone base station w/ corded handset - WDCT - SIP - 9 lines + 1 additional handset(s)
Instructions
1) Unscrew the six screws on the back panel of the NEC PBX to remove the panel. Once the screws are removed, lift the back panel upwards and off.
2) Insert the data card into one of the four empty data card slots on the center left-side of the PBX's main board, aligning the metal contacts on the data card with the metal contacts in the card slot. Push the card in gently until it snaps into place.
3) Replace the back panel onto the unit, sliding it downward into place. Then, replace and tighten the back panel screws
Polycom SoundPoint IP 331 - VoIP phone - SIP - 2 lines
Grandstream GXV-3000 - IP video phone - SIP, SIP v2 - 3 lines
Aastra 6757i CT RP - Wireless VoIP phone base station w/ corded handset - WDCT - SIP - 9 lines + 1 additional handset(s)
No comments:
Post a Comment